產品列表
螺紋規格AG Thread AG |
適用電纜Cable range(mm) |
螺紋外徑Thead O.D(mm) |
機板口徑(mm)Mounting hole diameter |
螺紋長度GL Thread length GL(mm) |
接合長度Joint length H(mm) |
扳手徑 Spanner size (mm) |
M6×1 |
3-1.5 |
6 |
6-6.2 |
5 | 16 | 11/12 |
M8×1.25 |
4-2 |
8 |
8-8.2 | 5 | 16 |
11/12 |
M10×1.5 |
6.5-3 |
10 |
10-10.2 | 7 | 19 |
14 |
M12×1-5 |
6.5-3 |
12 |
12-12.2 | 7 | 19 | 14 |
M12×1.5 |
8-4 |
12 |
12-12.2 | 7 | 19 | 17/18 |
M14×1.5 |
8-4 |
14 |
14-14.2 |
7 | 19 | 17/18 |
M16×1.5 |
8-4 |
16 |
16-16.2 |
8 | 20 | 18 |
M18×1.5 |
10-5 |
18 |
18-18.2 |
8 | 21 | 20 |
M20×1.5 |
12-6 |
20 |
20-20.2 |
8 | 22 | 22 |
M22×1.5 |
14-10 |
22 |
20-20.2 |
8 | 23 | 24 |
M24×1.5 |
14-10 |
24 |
24-24.2 | 9 | 25 | 27 |
M25×1.5 |
14-10 |
25 |
25-25.2 | 9 | 25 | 27 |
M25×1.5 |
18-13 |
25 |
25-25.2 |
9 | 27 | 30 |
M27×1.5(2) |
18-13 |
27 |
27-27.2 | 9 | 27 | 30 |
M28×1.5(2) |
18-13 |
28 |
28-28.2 | 9 | 27 | 30 |
M30×1.5(2) |
18-13 |
30 |
30-30.2 |
9 | 29 | 32 |
M32×1.5(2) |
22-15 |
32 |
32-32.2 |
10 | 29 | 35 |
M32×1.5(2) |
25-18 |
32 |
32-32.2 | 10 | 29 | 40 |
M33×1.5(2) |
22-15 |
33 |
33-33.2 | 10 | 29 | 35 |
M36×1.5(2) |
25-18 |
36 |
36-36.2 | 10 | 31 | 40 |
M37×1.5(2) |
25-18 |
37 |
37-37.2 |
10 |
31 |
40 |
M40×1.5(2) |
25-18 |
40 |
40-40.2 |
11 |
31 |
45 |
M40×1.5(2) |
30-22 |
40 |
40-40.2 |
11 |
35 |
45 |
M42×1.5(2) |
30-22 |
42 |
42-42.2 |
11 |
35 |
45 |
M47×1.5(2) |
33-25 |
47 |
47-47.2 |
11 |
37 |
50 |
M48×1.5(2) |
33-25 |
48 |
48-48.2 |
11 |
37 |
50/52 |
M50×1.5(2) |
38-32 |
50 |
50-50.2 |
12 |
37 |
54/55 |
M54×1.5(2) |
38-32 |
54 |
54-54.2 |
12 |
38 |
57 |
M56×1.5(2) |
38-32 |
56 |
56-56.2 |
12 |
38 |
59 |
M60×1.5(2) |
44-37 |
60 |
60-60.2 |
13 |
38 |
64 |
M63×1.5(2) |
44-37 |
63 |
63-63.2 |
13 |
38 |
67 |
M64×1.5(2) |
44-37 |
64 |
64-64.2 |
13 |
38 |
67 |
M72×2 |
52-42 |
72 |
72-72.2 |
15 |
42 |
77 |
M75×2 |
52-42 |
75 |
75-75.2 |
15 |
42 |
77 |
M80×2 |
62-55 |
80 |
80-80.2 |
15 |
45 |
88 |
M88×2 |
70-65 |
88 |
88-88.2 |
15 |
45 |
94 |
M100×2 |
84-78 |
100 |
100-100.2 |
15 |
45 |
110 |
產品材質:接頭主體部位采用黃銅鍍鎳制成,夾緊件采用尼龍塑料(PA)制成,密封件和O型密封圈均采用丁腈橡膠(NBR)制成;
產品認證:歐洲CE認證、歐洲ROHS認證;
防護等級:在規定的卡口范圍內,并使用O型密封圈旋緊迫緊頭,達到IP68-10巴壓力;
工作溫度:靜態:-40℃到100℃,短時間達120℃。
顏色種類:金屬色;
動態:-20℃~到80℃,短時間達100℃;
螺紋長度:短螺紋適合用于薄型機板的開孔或附有內螺紋的設備上,長螺紋適合接合厚型機板。螺紋加長型可定制;
產品特性:特殊夾緊爪與夾緊圈凹凸相扣之設計,配合迫緊頭裝配省時便利,夾緊電纜范圍大、抗拉力強、可防水、防塵、抗鹽、耐酸堿、酒精、油脂及一般溶劑;
使用方法:金屬電纜防水接頭是電纜的配套產品,接頭可將電纜鎖緊,另一端可接入設備箱體上,也可以根據選用螺紋接入進出口為內螺紋的電動設備上;
備注:可根據客戶實際需要,特別定制。需要訂購時歡迎來電咨詢。
Material: Brass, nickel plated
Claw: PA
Sealing and sealing ring: NBR
Approvals: CE, ROHS
Protection degree: IP68
Temperature Resistance:-40℃ to 100℃, short time to 120℃.
Function: Extremely easy installation, simply insert cable through the assembled gland and tighten gland locknut until cable is secured. These cable glands are designed to withstand water, dust, salt, acid-base, alcohol, oil and common solvent.
Notes: Customization is available.